Please don't hesitate to call
We are here to help!
Leaders in lead shielding and lead products for over 60 years.

Lead Flashing

Specialty Radiation Shielding Products


Radiation Protection Products' custom fabricated lead roof flashings consist of a lead pipe boot burned to a sheet lead base. To seal to the vent pipe, simply roll the open end of the malleable lead boot to the inside of vent pipe.

The Standard weights of lead are 2½, 3 and 4 lb. Heavier weights (6 and 8 lb) are available by special order. See instructions for ordering.

lead flashings


Similar to the above lead vent roof flashing but having the unique feature of a corrugated boot at its base. This permits flexing of the boot. When ordering adjustable flashings, please list information as shown in items 1 through 4 below.

When ordering give:

  1. Pipe Size
  2. Base Size
  3. Boot Height
  4. Weight of Lead
  5. Roof Pitch

To learn more information about the radiation protection products that RPP offers, contact RPP or request a quote.

credit cards

The information contained on our website, submittals, specifications, etc is offered for assistance in specifying products and materials from Radiation Protection Products, Inc. It is not intended to be complete and Radiation Protection Products, Inc. does not assume any responsibility for the adequacy of the submittals/specifications for a particular application. These submittals/specifications are subject to change without notice and without incurring obligation. Actual performance may vary in specific applications. An appropriate and qualified design professional/structural engineer must verify suitability of products for use in a particular application, as well as review final submittals/specifications. Radiation Protection Products, Inc.