RPP providing a full line of radiation shielding products.
HomeProduct SpecsOrder InfoArchitectsCad DrawingsSpecificationsSubmittalsClientsContactRequest a Quote

RADIATION SHIELDING with LEADED GLASS


leaded x-ray glass

 Leaded X-Ray Glass Request a Quote

VIEW LEADED GLASS SUBMITTALS.

Leaded glass

RPP introduces the largest leaded x-ray glass available to the market!

Radiation Protection Products' Leaded X-Ray Glass is suitable for installation in screens, walls, and doors.  Our leaded glass x-ray glass allows for viewing of the imaging or radiation therapy procedures. More details on our leaded x-ray glass can be found on the submittals page.

Leaded X-Ray Glass is available in the following equivalencies: 1.6mm, 2.1mm, 2.5mm and 3.3mm. These lead equivalencies are based on 150kV. Leaded Glass with higher lead equivalencies is available upon request.

Leaded Glass standard sizes

8" x 10"
42" x 42"
10" x 12"
48" x 36"
12" x 12"
48" x 40"
12" x 16"
48" x 42"
12" x 24"
48" x 48"
12" x 36"
60" x 36"
16" x 24"
60" x 40"
18" x 24"
60" x 42"
24" x 24"
60" x 48"
24" x 48"
72" x 36"
30" x 24"
72" x 40"
30" x 30"
72" x 42"
32" x 40"
72" x 48"
36" x 24"
84" x 36"
36" x 30"
84" x 40"
36" x 36"
84" x 42"
40" x 40"
96" x 42"
40" x 42"
96" x 48"
  108" x 54" (max size)


Custom sizes for leaded glass quoted upon request.

 

 Diagram of operators and x-ray room side of shielding lead glass or acrylic window and of solid and telescopic window frames available.

Leaded Glass Rough Opening Dimensions

  Add to Glass Size
Width Height
H M Tele +1"
(3 cm)		 +1"
(3 cm)

For complete radiation protection, look at RPP’s lead lined door frames, custom lead lined doors and neutron doors. To learn more contact Radiation Protection Products or request a quote.

Lead Lined Drywall | Leaded Glass | Lead Ballast | RFQ | Contact Us
1000 Superior Blvd Suite 310 Wayzata, Minnesota 55391
Copyright © 2008 Radiation Protection Products, Inc. All rights reserved. | Site Map

The information contained on our website, submittals, specifications, etc… is offered for assistance in specifying products and materials from Radiation Protection Products, Inc. It is not intended to be complete and Radiation Protection Products, Inc. does not assume any responsibility for the adequacy of the submittals/specifications for a particular application. These submittals/specifications are subject to change without notice and without incurring obligation. Actual performance may vary in specific applications. An appropriate and qualified design professional/structural engineer must verify suitability of products for use in a particular application, as well as review final submittals/specifications. Radiation Protection Products, Inc.